How much would just 1% material saving mean to your business?

Software that delivers an ROI measured in months or weeks, not years.

Free nesting benchmark comparison

Request a free nesting benchmark comparison to see how much you could be saving. Send us your best nest along with its associated DXF plies and we will run it through our High and Ultra Performance nesting engines for comparison.

Fill in the form below and we'll send you everything you need to get started.

Sheet metal nesting benchmark request

The process

Here's what we need to perform your benchmark.

cad-drawings

1. CAD Files

Provide us with a DXF of your most efficient nest, along with the associated part CAD files. Alternatively, we can easily split a DXF nest.

Nesting settings

2. Limitations & Spend

Tell us the material borders, spacing between parts, allowed orientations and any rotational tolerances allowed, along with your annual material spend.

non-disclosure-agreement

3. NDA (optional)

As many of our customers work in aerospace or defence, we are happy to sign your NDA before receiving files.

What else can JETCAM do?

Although JETCAM has been developing nesting software since 1986, our reach extend much further into manufacturing, solving problems that ERP system often cannot, including:

  • Nest scheduling by the cutter
  • Material location management
  • Automatic allocation of material during nesting ('dynamic' nesting)
All of the above includes tight integration with ANY ERP system.

When we contact you to arrange the nesting benchmark, we can also arrange a demonstration tailored to your specific requirements.

Supported machines

Including (but not limited to):

  • Accu-Router
  • Adige Sala
  • AKS
  • Amada
  • AXYZ
  • Balliu
  • Behrens
  • Bystronic
  • Carrier
  • CMS
  • Cutline Penta
  • Danobat
  • Dardi
  • Durma
  • Eagle
  • ESAB
  • Esprit
  • Euromac
  • Fastcut
  • Finn-Power
  • Flow
  • FPL
  • Goiti
  • HAAS
  • Hankgwang
  • Held
  • HPM
  • HSG Laser
  • Hyperterm
  • Ingersoll Rand
  • Jet Edge
  • Jinfangyuan
  • Koike
  • Komatsu
  • Komo
  • Lasercomb
  • LaserLab
  • LVD
  • Mazak
  • Mitsubishi
  • Multicam
  • Murata Wiedemann
  • Nisshinbo
  • NTC Nippei
  • Nukon
  • OMAX
  • Pacer
  • Platemaster
  • Prima
  • Pullmax
  • Quantum
  • Rainer
  • Raskin
  • Ridder Waricut
  • Safan
  • Salvagnini
  • Schuler
  • SCM
  • Strippit
  • Tailift
  • Tecnology Italiana
  • Trumpf
  • TTM
  • Umbra
  • Vanad
  • Wadkin
  • WardJet
  • Whitney
  • Yawei
  • Zinser

Award-winning software

Trusted by our customers, respected by our peers.

camx_ace_2019
compositeuk2013
MCIA2019-Finalist
iteuropa2016

Case Study: I-Cherng Refrigeration

4-month ROI and 13.2% runtime improvement

I-Cherng Refrigeration, based in Thailand, has been a user of JETCAM Expert nesting software since the early 1990’s. They purchased an Amada Fiber laser, which was supplied with software. After struggling for a month to use it they contacted JETCAM to ask for a post processor to drive the machine. The post was installed the same month and immediately delivered benefits.

cs_i-cherng_amada_fibre_laser1
JETCAM International s.a.rl., 2021